Quotes returned within 24 hours · Nationwide UK installation0800 246 1536

AI mezzanine designer

Design your mezzanine floor online

Enter your building and how you want to use the space. You get a concept layout with column grid, staircases and headroom checks, an installed cost, and an AI engineering review against UK Building Regulations — in seconds, with no details required.

Your building

Your mezzanine

Concept drawing

24 m24 m

Not to scale for construction. Column positions, stair and gate locations are indicative until surveyed.

Deck area

384 m²

1 tier

Column grid

4.8 × 5.33 m

24 columns

Steel weight

≈ 12.3 t

192 t capacity

Edge protection

64 m

1 stair, 1 gate

Indicative installed cost

£74,480 – £99,871

Typical £84,637 · approx £220 per m² · excludes VAT

Includes steel, decking, edge protection, access, installation, design, calculations and building control submission.

Automated design checks

  • Design expects 2 staircases

    Longest travel distance to a stair is roughly 21.6 m. A second, remote escape stair is normally required so occupants can move away from a fire in either direction.

AI engineering review

Our AI design assistant reads your layout like a mezzanine engineer: structural sense, fire and escape strategy, accessibility, buildability and what to nail down before quoting.

Send me this design

Step 2 of 2 · No obligation · Your details are never shared

UM Mezza · 0800 246 1536 · office@umstoragesystems.co.uk

Design attached to your enquiry

Building: 40 m × 24 m, 8 m clear height Deck: 24 m × 16 m (384 m²) × 1 tier, 384 m² total Use: storage; load rating 500 kg/m² (192 t total capacity) Position: left; clear height under deck 3 m, above deck 4.62 m Column grid: 5 × 3 bays at approx 4.8 m × 5.33 m, 24 columns, approx 12.3 t of steel Access: 1 staircase(s) (design suggests 2), 1 pallet gate(s), goods lift: no Edge protection: approx 64 linear metres Automated checks flagged: WARN — Design expects 2 staircases

SEIRS-qualified installers

Qualified teams for safe, compliant installation

SEMA-trained engineers

Specialist design and technical expertise

£10M insured

Public liability cover for every project

60+ years' experience

Combined mezzanine and storage expertise

Free UK site surveys

Slab, access and measured-layout checks

Quotes within 24 hours

Fast commercial response after survey

How it works

From a sketch on screen to a fixed price

  1. 1. Size it. Enter the internal dimensions of your unit and the deck you want. The tool keeps the deck inside the building and works out the column grid from the load rating you choose.
  2. 2. Check it. Headroom above and below, escape travel distance, staircase provision, fire protection and accessible access are checked as you type, with the reasoning shown.
  3. 3. Review it. The AI review adds the judgement calls: where the design is expensive for no reason, what building control will ask about, and what to measure before we quote.
  4. 4. Price it. Send the design over and a UM Mezza estimator turns it into a fixed quotation after a free UK site survey, usually within 24 hours of visiting.
What does the AI mezzanine designer actually do?
You enter your building size, clear height and how you want to use the deck. The tool lays out a column grid, positions staircases and pallet gates, checks headroom above and below the floor, estimates steel tonnage and cost, and flags Building Regulations issues. The AI review then reads that design like an engineer would and explains the risks, the fixes and what a surveyor will need to confirm.
Is the design good enough to build from?
No, and no online tool's is. It is a properly reasoned concept design that gets the size, grid, access and budget right before anyone visits site. Fabrication needs stamped structural calculations, a slab assessment and a building control submission, all of which UM Mezza produces after a free survey.
How accurate is the cost figure?
It uses the same UK installed rates as our cost calculator and is typically within around 15% of a surveyed quotation. Slab condition, restricted access, steel price movement and the agreed fire strategy are the usual reasons the final figure moves.
Do I need to give my details to use it?
No. Design, checks, drawings and costs are all free to use anonymously. Details are only needed if you want the design emailed over or want us to survey the building.
Does the designer cover Building Regulations?
It checks the things that most often derail a mezzanine: 2.0 m minimum headroom under Approved Document K, travel distance and escape stair provision under Part B, accessible access under Part M, fire protection for office, retail and multi-tier decks, and edge protection lengths. A full fire strategy is still agreed with your building control body.

Turn your design into a fixed price

Send us the design you've just built and we'll survey the slab, access and fire strategy, then issue drawings and a firm quotation.